[Picture]
Build Size: 46mm x 51mm x 38mm
GCode: Skeinforge49
Crave > Layer height:
Speed > Speed Feed and Flow Rate: 30.0
solid fill rate
infill width over thickness (ratio): 1.5 (default 1.5)
increase value to reduce extruded plastic
decrease value to expand extruded plastic
if solid layers had too little plastic or too sparce and
you have tiny gaps between filament make this number smaller.
Dimension
Extruder Retraction Speed (mm/s)
Retraction Distance (mm) :
No comments:
Post a Comment